It was mostly only an annoyance, but I had wanted to get to the bottom of it.Īs a first step, I installed the beta of v23 SP1 as I had recalled reading on the forums that a few connection-related bugs had been squashed since the v23 release. Well, to say that it was “disconnected” probably isn’t fair rather, it would occasionally have a connection blip where it’d disconnect and then immediately reconnect. However, I found that AIM still became disconnected from time to time. (All of these options are under Administration → Management.) However, if you set “Maximum Ports” to 4096 and both “TCP Timeout” and “UDP Timeout” to “120 seconds”, Bittorrent should be back on track. The first major one is Bittorrent apparently, the high number of connections can overwhelm its poor little mind. While the firmware is well coded, there are some circumstances where the stock configuration runs into trouble. (That can be pretty handy to ensure that port forwarding always works as intended.) My favorite feature may be the static DHCP set up - you can define a MAC address for which it will alway receive the same ip address. In any case, I’ve been running DD-WRT for several months now and it’s been working great. Operate the router as a miniature low-power PC, running a variety of Linux applications. Or a managed hotspot with a RADIUS server. Create a wireless distribution system (WDS) or a mesh network. You could use the WRT54G as a repeater or a bridge. The real deal is what the WRT54G can do, with the right replacement firmware, that youâ€™d only expect to find on a commercial-grade router costing several times as much. Or, in case not, here's a quick recap - the Linksys WRT54G runs Linux and, by its GPL nature, they’ve released the source code for their firmware building upon that, many others have created firmwares with extra features. If you have a Linksys WRT54G router, then you may be familiar with the DD-WRT firmware.

Dd wrt v24 sp2 radius server